Conventional fire alarm systems smoke detector sensor with self-check function
-
Feature:
-
self-check button:could self-check circuit and all components works normally or not.(also alarm if labyrinth not install well)
-
exact smoke concentration & alarm consistency:All detector will calibrating consistency,make sure no fake alarm with less or too much smoke.
-
could load the strong electricity:have contact output function. The 4 wires could alarm and connect 220V or 9-35V sounder alarm etc
-
small alarm current: Our smoke detector could connect 50pcs each zone on the converntional fire alarm control panel
Specifications:
Operating voltage: DC 9-35V
- Standby current: less than 2mA
- Alarm current: less than 10mA
- Operating temperature: -10℃to +50℃
- Working humidity: less than 95%RH
- Alarm mode: network output / LED indicator
- Detecting area:80 square meters (with the installation
- height of 6m-12m), and 60 square meters (with the installation height of less than 6m)
- Sensitivity: class I
- Alarm output: relay output
- Dimension: 100(diaMETER) * 42mm(deep)
Related Products:
